Home About Products Warranty Downloads Installation Room Heat Calculator Contact FAQs

Installation

The installation of any Hothouse Product should only ever be carried out by a qualified HETAS engineer.  Any information, specification or recommendations provided here is for reference only.

Installation - Type A

This installation is suitable when a free-standing stove is fitted into an existing clay lined chimney.  The installation consists of a single wall 45° (preferred) or a 90° bend with soot trap. straight length and a flue pipe reducer which fits securely into the clay lined chimney.  All joints must be sealed with fire cement.  When using this type of installation it is essential that the clay lined chimney has been inspected and fit for use. 
The ECO friendly way to heat any home.
Hothouse Inspired Products Hothouse Stoves - Installation Hothouse Stoves - Installation

Installation - Type B

This installation is suitable when a chimney system needs to pass through an external wall.  The installation consists of a single wall straight with cleaning door, single wall 45°, twin to single wall adapter, twin wall telescopic straight, twin wall 45°, base wall support, twin wall straight lengths  and twin wall 45°, wall brackets, adjustable wall brackets, twin wall rain/weathering cap.  It is recommended that the chimney is supported for every 1.5 metres of vertical flue run.
Hothouse Stoves - Installation

Installation - Type C

This installation is suitable when a chimney system needs to pass through the internal infrastructure of a building.  The installation consists of a single wall straight with cleaning door (single wall must change to twin wall a minimum of 150mm below ceiling), twin to single wall adapter , twin wall straight, flat rosette, firestop, roof bracket, twin wall rain/weathering cap.
© Hothouse Inspired Products Ltd. 2014
Installation